Skip navigation and go to the page directly
Search

Newsletter

  • Parasound Halo P7
  • Parasound Halo P7

Parasound Halo P7

Preamplifier

By using the P7 pre-amplifier, it is possible to amplify 7 channels analogously. Through the addition of a source with built-in decoders and a separate power amplification, it is possible to compile an A/V system offering a superior performance compared to integrated solutions.

€ 2450,-

All stated prices are per item and including 19% VAT, unless stated otherwise.
Shipment costs are calculated per product by our sales department.

Specifications of Parasound Halo P7

Type  Vooramplifier
Number or channels  7
Rated output (per channel)  5 Hz - 100 kHz, +0/-3 dB
Inputs

 2 Multi channel (7.1) inputs for surround sound movies and music
7 Stereo inputs (one balanced XLR input)
1 MM or MC phono input
Front panel input jack for portable MP3 player
Outputs Unbalanced RCA and balanced XLR 7.1 outputs
Subwoofer output whiteh analog bass management
Serial port for RS-232 control
Rear panel IR input jack
3 different 12v trigger outputs
High quality headphone output
Measurements (H x W x D) 105 mm x 437 mm x 350 mm
Weight  6,1 kg
Colour  silver
Other  Total harmonic distortion:
< 0.006% at 20 kHz

S/N ratio:
  > 110 dB, input shorted, IHF A-weighted
  > 95 dB, input shorted, unweighted

Cross-talk:
85 dB at 20 kHz

Line Input Impedance :
Unbalanced: 14.2k Ω
Balanced: 4.7k Ω per leg

Phono Input Impedance :
MM setting: 47k Ω
MC setting: 100 Ω

Output Impedance :
Unbalanced: < 60 Ω
Unbalanced: < 60 Ω per leg

Input Sensitivity:
200 mV for 1 V output
Total Gain: 14 dB (Volume limiter set to 110)
Maximum Output: 8 V (Vol. Limiter set to 110)

XLR Pin Identification:
1 = Ground (Shield)
2 = Positive
3 = Negative

AC Power Requirement:
100 - 250 V / 50 - 60 Hz (voltage is automatically selected)
10 watts standby
65 watts when turned on
Guarantee 2 years